The best way to do this is to have all of the paper trays empty and then proceed as follows: During the warm-up sequence, both of these exhaust fans are supposed to turn. Printers Lexmark Optra SC – printer – color – laser. The HP Tango X writes the book on bookshelf printers. Answered on Mar 05,
|Date Added:||13 October 2015|
|File Size:||64.11 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Make Your Selection
Suspect either the transfer roller solenoid or transfer roller motor malfunction. Please assign your manual to a product: The printer would have to be professionaly serviced by authorized service centre. If the Fan Stall error continues to return when you power on the printer or when you try to print, the printer will probably lexjark service.
Put paper in tray 1 only. Priter is a very slow 13 year old printer, claiming 7. If not and you have changed the toner cartridge then most likely the fuser assembly needs to be replaced. If the error is occurring from the integrated paper tray tray 1 AND you have optional paper trays installed, take all of the paper out of tray 1 but leave tray 1 installed. Tablets by Dan Ackerman 8 days ago. You should take the rubbers off the wheels, wash them with water and soap, rinse them and thoroughly dry.
Uploaded on Aug 25, Printer Media Media Load Type.
You can also find these instructions in the appropriate link below. The pad on the solenoid goes all gunky and holds back the arm from leexmark attracted instantly to the magnet, You need to clean the underside of the armerture of SL5. Do-it-all budget prjnter is a perfect fit for tight spaces Do-it-all budget printer is a perfect fit for tight spaces by Justin Yu.
When you pull out the paper tray the transport system with rollers can be seen from the bottom side of the printer. No matter what is the reason that paper doesn’t reach the sensor your printer will indicate that there is “no paper”.
If the error does not return, it may have been an isolated incident. The auxiliary cooling fan is located on the back of the printer, on the right-hand side.
Lexmark Optra SC – printer – color – laser Overview – CNET
If there is an item stuck there, see if you can remove it. The second exhaust fan was eliminated on some later models of these S series printers. In my understanding it better to wear out someone else machine let them take the heart ache and expense of keeping quality supplies up to printing big runs, but thats only my educated understanding, in truth I make more from you buying toners and drums endlessly; rather than paying 10cent printerr print or whatever.
Answered on Mar 03, You can perform the following checks: Keep an eye on it for the next few days. The main exhaust fan lemark located on the top of the printer, on the rear left side. If not, you will probably need to have a technician remove the top cover unit and extract the jammed item from the fan. If the printer is already plugged directly into a wall outlet, try it at a different wall outlet.
Tablets by David Carnoy Dec 13, Answered on Nov 04, Answered on Nov 19, For information on removing an optional drawer, click here.
Lexmark SC 1275 Printer User Manual
During the warm-up sequence, both of these exhaust fans are supposed to turn. Power strips and uninterrupted power supplies can cause a low amperage problem in your printer, which could trigger a error.
Power off the printer.